• Gorman Morris posted an update 5 months, 1 week ago

    An ornamental molding can be defined as any continuous projection which is used to enhance the feel of a wall. In ancient Greece, these folks were first used to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    One kind of molding – the frieze (or frieze board) – was first applied to the Parthenon with the Acropolis. The frieze is known as a part of the Greek architectural style.

    The Parthenon was developed for the goddess Athena. The frieze moldings which are used were meant to tell the story of her triumph over Poseidon in wanting to bo the patron from the ancient city which can be now Athens.

    The frieze panels really are a compilation of designed pediments that are filled up with the photos of Athena’s birth and rise to power. Today, a frieze board could be the flat panel just under a crown molding or cornice. Often, low relief is used for this panel with regard to added decoration.

    Today, frieze moldings are most common like a area of an ornamental molding that follows the neoclassical architecture or decorating style.

    You need a pretty high ceiling (minimum of 9 feet), and it’s smart to stain or paint the frieze as well as the crown molding the same color. The frieze is a superb method to visually bring the ceiling down and make the bedroom appear cozier.

    Crown Molding

    Crown molding is the most popular type of cornice molding. Crown molding generally is a single-piece of decorative molding, installed near the top of a wall, in an angle to the adjoining ceiling. However, I have come across crown molding assemblies of 5 or higher pieces in more elaborate settings.

    Crown molding often features a profile that projects from the ceiling and on the wall, adding a wealthy appearance to some room. It is often used towards the top of cabinets or built-in furniture.

    Introducing this sort of decorative molding into a easy room gives a historic character that the room wouldn’t normally otherwise have. Crown molding is also used in combination with other moldings to incorporate details to fireside mantels and shelves. (For it’s worth, this might be my favorite architectural feature).

    Crown molding is a type of Cornice Molding. The phrase "cornice" describes molding installed over the the top of a wall or higher from the. When this therapy is created from multiple components of molding, stage system a "build-up cornice." One other form of cornice molding will be the Cove Molding.

    Cove Molding

    Cove molding is extremely much like crown molding, with similar application overall performance. The main difference backward and forward is within the profile. Cove molding includes a concave profile (which bows inward) while crown molding has a convex (outward) profile.

    While crown is most in your own home in traditional settings, Cove moldings are equally comfortable in country, or even contemporary settings. That you do not normally see multi-piece assemblies of cove moldings. It is possible to occasionally find it "beaded" at upper and lower for the little accent.

    Entries, formal rooms, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens as well as other more functional areas of the property might be in places you will see the better style of the cove molding. Over time, coves and crowns are getting to be more compact, most still bear the shapes and styles from the original Greek and Roman designers.

    Chair Rail Molding

    A seat rail is a decorative molding that divides a wall horizontally, usually about 32" to 36" across the floor. They protect the walls in locations where damage might occur from people getting out of bed away from chairs.

    That is why, the more traditional chair rails may nosing within the center, with curved and beveled surfaces that taper to the wall above and below the nosing.

    Today, chair rails remain a common detail in traditional interiors. They serve the decorating effect of unifying the various architectural specifics of a room, for example window and door trim, and fireplace surrounds.

    Chair rail could also be used as being a cap for wainscoting and other wood paneling. This decorative molding adds a sense of detail and charm while achieving continuity in a room by unifying the different decorative elements.

    Panel Molding

    Panel molding, commonly termed as a picture frame molding, appears like a large empty frame, and is often portion of designs on walls of old Colonial and, Georgian, and Early American homes. The position with this molding should be over the chair rail height resulting in Ten to twelve inches below the ceiling.

    How big is this sort of decorative molding, measuring 1" to 3" wide, ought to be proportionate towards the ceiling height from the room. Like the other moldings, panel molding adds a sense charm and delicate detail to a room.

    Wall framing appears at the Georgian time period of American architecture, when plaster began to replace wood panels for the walls. Panel molding is also a fantastic way to divide walls into large, aesthetically pleasing units, minus the same cost of full wall paneling.

    Another use of this versatile molding would be to trim openings made by wider planks which are assembled as rails and fashions. Often, the centers of the frames are still open. Through the use of panel moldings throughout the perimeter with the opening, you develop the feel of a picture frame.

    When this decorative molding is painted inside the same color because the surrounding walls, you use a sculptural quality with a wall, adding texture and shadows. If moldings are painted in contrasting colors, they can develop a striking three dimensional appearance, giving depth and dimension. This kind of treatment methods are popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the base of the wall from ware and tear, while hiding openings and also other irregularities in which the wall meets the ground. Base moldings provide floor line an increased profile, and can be as elaborate or simple as you like.

    Whereas it’s relatively easy to put in chair rail over a level plane, baseboard (like crown) could be tricky should your floors (or ceilings) are certainly not level. That is why, I would recommend finding a professional woodworker for the installation of these moldings.

    Jointly remedy to uneven floors, it is possible to purchase a "shoe molding" down the bottom front edge to own baseboard a finished look. Another thing you’re able to do with baseboard (in addition to with the toe kick of your respective cabinets) is incorporate accent lighting.

    It is not commensurate with the pure traditionalist, however it is a reasonably nifty method to have accent lighting across the perimeter of an room. You could not do that until they came up with small LED rope lights these days.

    Rope lights appear in different lengths and colours, and is easily installed behind baseboard. Just make a notch in the back side from the baseboard, at the pinnacle, and run the rope lights in to the notch.

    This can be often utilized in commercial spaces, but continues to be put in entries and hallways – specifically in contemporary homes.

    Flexible Moldings

    In case you have a curved wall or arch, it is possible to likely have a good craftsman build a curved molding for about 3 x the price tag on an upright molding. Or, you should buy a flexible molding for about a similar price as the straight one.

    These enable you to install moldings onto curved surfaces or arches, with no delay and cost of having them produced from wood. The stock profiles (you can find hundreds) are the same towards the rigid versions and they are compatible in terms of paint finish is involved.

    Check out about
    ecomoulding check this popular net page.